9 replies
by dmiles
I would check the device manager to make sure that ther are no IRQ conflicts.
The anti virus could be causing the hang up problem,try msconfig from the Run dialog box and clear the check mark to disable the antivirus at start up then reboot,to see if this will clear up the problem.
by dugandist
by tbradley
Get into your system BIOS, usually hitting F1 or del upon startup. Find a setting
( could be anywhere ), that either clears/resets ECSD or is it ESCD? data, or resets configuration defaults. NOte... this is not system defaults, but configuration defaults.
Your system is trying to play nice with the new video card, but still retains some configuration settings from the old.
by dugandist
by ann777
I recommend that you also reseat your RAM and make sure that it did not loosen when you installed the video card. Sometimes RAM needs to be in a particular slot in order to operate properly.
by dugandist
by csmith
Check the HD cable.
Regards, Chris
by dugandist
by dugandist
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending