Discussion Locked

PCI USB card freezes XP

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i installed a USB/Firewire PCI card, and when i try to use a USB external hard drive, it freezes my computer. all the drivers are installed, and there are no yellow ! in the device manager. all drivers are updated. device manager does not report any conflicts. i have the latest updated windows stuff, including SP2. the device manager seems to read and list the card properly. there is however, a device manager listing for an unknown device.

some more info:

P4 3GHz HT 800FSB
ASUS P5RD1-V mobo (latest BIOS)
2GB RAM
ASUS EAX550 256MB graphics card installed in PCI-Express 16 slot (working fine)
Firewire Card in PCI 1 (working properly)
USB/Firewire Card in PCI 2 (causing the problems)
PCI 3 slot unoccupied

i have also tried moving the erring card to PCI 3, but same thing.

any help greatly appreciated.

IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 4 Communications Port (COM1) OK
IRQ 5 MPU-401 Compatible MIDI Device OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 12 Microsoft PS/2 Mouse OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 17 Texas Instruments OHCI Compliant IEEE 1394 Host Controller OK
IRQ 17 ALi PCI to USB Open Host Controller OK
IRQ 18 ASUS Extreme AX550 Series OK
IRQ 18 VIA Rev 5 or later USB Universal Host Controller OK
IRQ 18 VIA OHCI Compliant IEEE 1394 Host Controller OK
IRQ 18 ALi PCI to USB Open Host Controller OK
IRQ 19 VIA Rev 5 or later USB Universal Host Controller OK
IRQ 19 ALi PCI to USB Open Host Controller OK
IRQ 20 VIA USB 2.0 Enhanced Host Controller OK
IRQ 21 Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller OK
IRQ 21 ULi SATA Controller (M1573) OK
IRQ 22 Microsoft UAA Bus Driver for High Definition Audio OK
IRQ 23 Standard Enhanced PCI to USB Host Controller OK

18 replies

by wcp

It appears that the unknown device is non-plug and play.
Let Windows find the driver. (Right click on unknown device > Update Driver..)
Also display all non-plug and play devices (View > Show hidden devices). Again, let Windows find the driver.

If you still have the same problem, the PCI card may be bad or incompatible to the MB.
Install it in another system to find whether the card is bad or not.
Install another USB PCI card (same model) in your system to find whether the MB is the culprit. The MB may need BIOS flash.

by wcp

Install the card on PCI3 slot.
If it works, the PCI2 slot is bad.
If it does not, install it on PCI1 slot.
If it works, the PCI3 slot is bad.
If it does not, you still have card or MB issue. Use the procedure of second paragraph of my answer.

by hal 9000

Well first I would try moving the USB card to a different PCI slot as there are known problems with some PCI cards not working in a PCI slot. This most often happens with a AGP Video Card and something like a Video Capture Card in PCI Slot 1. But while that isn't the problem in your particular case you could have a good old fashion Hardware conflict between the Firewire Card and the USB Card so try another PCI slot and if that doesn't work remove the Firewire card and see if things work then. If they do try fitting the Firewire card to a different PCI Slot and see if things still work if they do put in a back plate filler and close the case up and forget about it.

If things do not work you can then try moving the USB card with the Firewire card removed to each PCI slot and reboot and check to see if it is working. If it works on every PCI slot except the 16 one then try the Firewire card in all the PCI slots with the USB removed, if that works you'll need to either Firewire or USB PCI card or maybe even a Combo Firewire/USB card with some powered Hubs to give you the greater number of available devices.

Lets know how you get on.

Col

by hal 9000

If you decide to change one of the cards or both don't forget to first remove the drivers.

by hal 9000

Yes it is entirely possible particularly if the M'Board has USB 2 as well as the PCI card. The OS could be trying to work with both driver sets and coming up with a conflict that it can not overcome.

If you remove the PCI Card/Drivers and use the On Board USB ports do you get the same problem occurring?

by sgt_shultz

did you hook power up to the pci usb card and both usb connectors?
usb 2 hard drives ususally need 2 usb connectors connected (to get power

by sgt_shultz

did you hook power up to the pci usb card and both usb connectors?
usb 2 hard drives usually need 2 usb connectors connected (if the are 'bus' powered)

by seanarmenta

allright...i uninstalled and removed all PCI cards. i installed the erring USB/Firewire card back into the MB in PCI 1. windows re-installed drivers. device mgr is all good throughout. external USB hard drive has its own external power supply. i was able to successfully transfer a 200MB folder from USB external drive to computer. i then tried a larger folder (1GB), but after 1/4 way through the transfer, the system froze again. i also tried the same exercise using my external Firewire drive with the same results.

i noticed that my mobo has ALi USB, while the card in question has VIA USB. is it possible that these different chipsets conflict each other if residing within the same system? should i get a PCI card with an ALi USB chipset?

by prentisspg

My thoughts are that your card is fine. You were able to transfer a small file successfully. Originallly you had an unknown device in device manager (which was probably the controller for your new card) and windows installed a compatible driver and it shows ok in device manager but the card still doesn't work. If you don't have the right driver, especially for the controller it won't work (freeze up). Since windows has installed the wrong driver it will continue to use this driver and you'll haxe to manually install the right one to get it to work.

by seanarmenta

HOOOKAY... thanks everyone for your input. i actually bought another PCI USB card with the same ALi USB chipset that my mobo has, and voila! no more problems. so it would seem that there would be issues with two different chipsets (ALi and VIA) residing in the same system. i guess they just don't like each other.

again, many thanks for your help.

This discussion is closed to new replies.