pick my own ip addresses
i want share my dial up /dsl connection with my family.
i want to select my own ip addresses and subnet mask.or will i be force to accept ip addresses allocated by the ics.where i can get more info.
thanks
Networks
i want share my dial up /dsl connection with my family.
i want to select my own ip addresses and subnet mask.or will i be force to accept ip addresses allocated by the ics.where i can get more info.
thanks
by jklein
by mhartmann
Jarif, it aint that easy as it may sound !
A) You want to share your dsl connection with your family. OK. But why do you want to select the IP address on the WAN (Internet) ?
B) A router has 2 IPs ! IP#1 for the external/WAN - this will be pulled automatically and WILL change !! IP#2 is in your own network. In there you can give your PC any IP you would like since they are 2 separated networks ! Easy as that. On the IP#2 you have also the option that the "router" gives you the IP automatically. Be ware to use the C-Class IPs (for private networks) i.e. 192.168.0.1 to .254 - BUT you need one IP for the router, mostlikely .1 or .254 - makes it easier for you to administrate ;))
Further questions ? drop a note here - i get back to u than !
by choppit
by ctmoore1998
If you use ICS then it will default to the 192.168.0.2 network when you run the wizard, I would go to circuit city or best buy and get a SOHO router with 4 port hub and/or wireless access point (easier than running CAT V sometimes) configure router for NAT and then you can set the network to any 'private' ip address that you want typically anything in the 10.0.xxx.xxx or 192.168.xxx.xxx -192.168.100.xxx
are the typical private ips. Also then your pc doesn't have to be on for them to access internet. If you want internet access control go to webattack.com and download IprotectU freeware and it allows you to control internet access times and content.
This discussion is closed to new replies.
Sort by Trending