Discussion Locked

ping

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

two systems having same ip address,
solve with correct procedure,
step by step i want,

9 replies

by tejota

I'm sure you check the event viewer on the PDC or on the controller handing out IP addresses to see what stations are conflicting.

by ustutz

Can't give you step by step without more information as to how you know that you have two systems with the same IP address, and how you got into that predicament. But here are some of the tools:

nbtstat -a and nbtstat -A from any NT box will give you what information that box has in it's name resolution cache for that name/address.

DHCP manager (if used) let's you find the "legitimate owner" of the IP address.

WINS manager (if used) will show you the name/address information registered with the WINS server.

Note that WINS and NBTSTAT also include user name information associated with that IP address.

If you own / know one of the two boxes, but not the other, change the IP address on the box you control. May have to hardcode (temporarily).

If you have the address in DHCP, exclude it form the scope (temporarily).

To prevent these things from happening in the future, shorten your DHCP lease (balance against increased network traffic).

If one (or both) of the boxes are Win95/98, use WINIPCFG to view the local configuration and force release / renegotiation of the DHCP lease ("Release All / Renew All").

Typically the box you own is not the one with the problem. And you won't beable to find the box that is not playing by the rules. Hence changing the IP address on your box / excluding the address from DHCP till things clear up.

by bryan_hartman

Here is what you can do. This happens alot with MAC's on a network. First you will have to find both systems on your network. On one of the systems run from a dos prompt ipconfig for WIN NT and winipcfg for win 95/98 and release the ip number for the network card. then turn off the pc. Then go to the other pc and reboot it. Then go back to the first pc and boot it up. It should go out and find a new ip

This discussion is closed to new replies.