Discussion Locked

plan and install cyber cafe

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to use a single telphone line, to give access to the internet to 5 or 6 users in a cyber cafe system. What are the necessary hardware components needed for the connectivity of such system?
I like to use Win NT4, what are the necessary software components to be installed on the server and the workstations?

6 replies

by dkroshan2002

The hardware components required are modem, modem cables, LAN cables and NIC's. All the computers that need to access Internet should be connected in LAN and configured. Install and configure modem on one of the computer and connect the modem to thetelephone line. Install and configure any proxy software (For example Winproxy from www.winproxy.com) on this computer, which will act as the proxy server.

On all other computers point the proxy settings in the browser to this computer.
No special software is required for the client.

Hope this will explain.

by tbradley

A cheaper solution, no server needed is to buy a 3com Lan Modem. This is a 4 port ethernet hub with 1 or 2 56kbps dialup modems. It contains it's own proxy software, and setup is less than 3 minutes.

You will need a dislup account from an ISP, plug the phone line into the modem, hook a patch cable from the hub to a workstation with a working Network Card, and start up Internet explorer. The only software needed is to have the NIC card properly installed, and tcp/ip loaded. Each subsequent workstation that launches explorer is assigned an internal IP number and shares the account already active. You can purchase another inexpensive 4 port hub to expand your total user base to 7.

We have several of these setup at some remote ( read way out in the sticks )sites. Experience shows that most users are not happy with a single line access shared with more than 3 users.

If ADSL is available in your area, that would be a better solution. One ADSL modem, and a inexpensive 8 port hub would serve. The only extra software you would need would be the equivalent of windows server. One machine controls the connection, the others piggyback off the server.

This discussion is closed to new replies.