Discussion Locked

PointSec Software

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is my first post to TechRepublic and I am looking for people who are currently using PointSec in a corporate deployment. It is hard to find any opinions that are not biased and it seems they don't participate in reviews that put them up against their competition.

Feel free to post all, good,bad,ugly....

Thanks

24 replies

by rajagopalan.durairajan

I have used the older version of Pointsec , which would ask for login before OS boots ; but the current version runs as a service - basically if you know any id/password / reset with Unix ---U R IN! not sure how its secure?

by eversdavid

I've experienced deployment of 1000's of users. Login is seamless and encryption is easy on user resources but we have seen an increase in BSODs which we are no longer able to troubleshoot effectively. reimaging in the field tripled upon deployment and has reduced to 2.5x pre rollout in 6 months. While the data appears secure on the encrypted drive, we are encountering significant productivity loss with the effort required to retrieve users data on non-bootable machines. It can take 4 hours to de-encrypt a drive. Any data recovery processes you already have will be seriously impacted. If you use Procmon to diagnose your machines you will have to find another tool as it causes a conflict with pointsec and crashes windows. Additionally, we've had problems with the Media Encryption piece that also required PME to be upgraded. Machines are mysteriously freezing and require a reboot. There were limits on the external drive sizes that I understand has been resolved. We had problems where SAS wouldn't run on encrypted drives and that is supposed to be resolved as well.

These are the problems that I'm immediately aware of. I hope you find it useful.

by dan

May I ask what versions of Pointsec PC and PME that you are using?

by david.bradbury

My company has Pointsec for PC version 6 and we plan to install it on a computer, which has SAS on it. Do you know if this version resolves the SAS failing to run on a Pointsec encrypted drive problem?

by dan

Pointsec PC still uses the PreBoot authentication in the newer versions. Yes you can turn it off, but the hard disk is still encrypted and the Unix/Linux password reset disks become useless.

by dan

Keep in mind that safeboot modifies the MASTER BOOT RECORD and that is never a good thing.

by mjohndrow

I would be happy to assist you with any information you are looking for. I know this is an older post but if you still need help let me know.

by pacsmgr1

Had plenty of unpartitioned space left on my corporate laptop with PointSec loaded on the C drive - so I decided to load Suse Linux 10.0 there. The yast install failed at the point where it tried to make c:\windows one of the mount points. What is the best way to partition linux volumes on a machine after PointSec is installed?

by mjohndrow

you may want to partition the drive first then install Pointsec. You will need to make sure you configure your pointsec package so it will know about the secondary partition.

by dan

SUSE linux is not supported with Pointsec Full Disk Encryption. It has to do with the kernal.

by profdie

Pease i need your help. I am the IT support of my company by name Dominic. Recently, our boss acquired a new laptop with the older one going to another department.

I was asked to remove Pointsec PC from it. On add and remove program, i was asked to input two username and password.

The only two username and password that can assess the system (Administrator and the user), i ave tried but it tells me it is wrong.

I don't know what to do again. Please help.

by stacksmasher

Tell your boss to move all his data to a CD/DVD and format the hard drive and reinstall everything.

It may lock you out after a few weeks anyway so you better do it ASAP.

by mjohndrow

you will need to decrypt the hard drive. not uninstall the pointsec application from add remove programs. do you use preboot authentication or windows integrated login? also what version of Pointsec are you using

by infosecurityguy

I know PointSec,Safeboot,but how is Utimaco and Secuware. Those two are everywhere in Europe. Can anyone comment? Infosecurityguy @ Hotmail

by stacksmasher

SafeBoot is sooo easy to setup and admin. It is better than all the others hands down.

FIPS 140-2 certified also.

by dan

Saying that SafeBoot is the best is only 1 opinion. I prefer Pointsec do to the fact I like to keep my Master Boot Record it tact. Safeboot makes modifications to that were as Pointsec does not. Pointsec is also FIPS 140-2 certified.

by mjohndrow

There are many products on the market. When choosing a product I would go with a full disk encryption product that supports two factor authentications for decrypting.

I was the PM charged with deploying PointSec to 3500 laptops. The project was implemented in 4 months from purchase to final deployment. The timeline was aggressive. We had a 2% failure rate which is very low for deploying an encryption product. The 2% failure did result in bluescreens which most of the bulescreens we were able to recover from by decrypting not re-rolling the OS. We identified and reported the issue to PointSec and they have now addressed the issue in their newest release. With only a 2% failure I would choose PointSec again. The product is low maintenance. Some additional information for you..PointSec was purchased by CheckPoint, another very reputable company. I think you will see tight integration with their firewall, Antivirus and encryption to produce a solid end point solution.
I hope this helps.

by dan

Check Point has a great new endpoint now. From what I have seen it is very good. All of the technologies are in one single client now.

by david.bradbury

John, my company has Pointsec for PC version 6. I'm attempting to get Pointsec installed on a computer which has an Adaptec SCSI adapter with a pair of 70 GB drives. The Adaptec adapter takes the pair of drives and makes them one logical 140 GB drive. Pointsec succeeds in the install of its software into the Partition Boot Record(I get the login for Pointsec), but it fails to transfer to Windows. Why am I getting the following message?

\system32\ntoskrnl.exe is missing or corrupt

by dan

Pointsec FDE does not support JOBOD configuration. as a matter of fact no FDE solution will. it has to do with the way the drive is encrypted.

by dan

Pointsec does not lock you out after a few weeks. When Pointsec is installed it requires 2 Pointsec Admins to be created. if you do not have them you can always format the drive.

by ngcheeyang81

uninstall of pointsec require 2 administrator account. try create another administrator account and try that one

This discussion is closed to new replies.