Question Locked

Powers Up to Acer Logo and Stops

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi. My desktop powers on but stalls with the Acer Logo on the screen. Underneath the logo is Del:Enter Setup and F12: Boot Sequence. The computer does not respond to either. I have tried to enter the BIOS using Ctrl/Alt/Esc and still nothing. Tried all the F keys and nothing. I tried to Boot using my XP Disk and nothing. Checked all the connections inside and all seems fine. Tried another HD and nothing. Any help would be appreciated.
The Spec is as follows.

Acer Aspire T180-UB7Z
AMD Athlon 64 x 2 3800+
1GB DDR11
160GB
XP SP3

Thanks. AT

5 replies

by jck

replace or re-program the BIOS.

by oh smeg

If so then it's not going to work at all and is probably hanging on a No Keyboard Present Error.

You'll need a working PS2 Keyboard and hit Delete as soon as the Acer Logo appears to enter the BIOS. Change the setting from Halt on All Errors to Do Not Halt on any error and save the changes when you exit BIOS.

Se what you get then. :)

Col

by theallenthomas

Hi. Thanks for the suggestion. Using a working PS2 keyboard made no difference. Still can't get any response or any further. Tried the Ram in different slots also to no avail. Cheers.

by oh smeg

If that doesn't work to allow you to get into the BIOS the M'Board is shot.

Col

This discussion is closed to new replies.