Discussion Locked

Pre-existing Windows 2003 network and those who love wireless

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a new network that is running Windows 2003 Server with Active Directory inside our corporate office with wireless Linksys routers with a T-1 line. I have 29 other locations that have either dialup or DSL connections also with a Linksys wireless router. Each router has a separate IP address assigned by the ISP we use. I have to get all location onto the one domain but because we use Active Directory I am afraid that will cause an issue. Any ideas on how to connect all of these locations to the main office?

2 replies

by bfilmfan

You could create 29 separate low-bandwidth AD sites, but if they are dail-up, I am going to tell you that will cause issues eventually.

Buy a Citrix or Terminal server solution and be done with it.

by grokked

You situation doesn't sound fun, but if you can afford some new equipment, it could work.

I currently run a similar, but much smaller, environment with a central office and 4 remote locations. I have upgraded the remote locations to some form of broadband, even when there is only one user, and have then used VPN capably routers to link each location to the main office. All users at any location can see the devices in the other locations as if they were on the same network. This allows for a centralize email system, smooth (if not always fast) file sharing, and even the ability for people to print in other offices instead of sending faxes.

Most broadband routers now include the ability to connect to a VPN. However, they are limited to one VPN connection. While this is OK at the remote locatioins, you would need a router at your main location capable of supporting multiple VPN links. If you do not already have all-identical equipment, then I personally would push to purchase new hardware. Having identical equipment at every location can greatly simplify your life, and wireless routers for the remote locations just aren't very expensive anymore. Your central location would, obviously, cost more, but you are probably looking at less than $1,000 for a device capable of supporting at least 29 VPN links.

This discussion is closed to new replies.