Question Locked

print quality - HP LaserJet Pro 500 MFP M570dw Colour Laser Printer

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello, does anyone know why I have two lines/streaks of colour ink on either side of a print?

The lines/streaks are about 1cm wide and run vertically down the page.

There are two lines/streaks on either side of the print.

The lines/streaks are about 1 cm in from the edge of the paper.

The printer is the HP LaserJet Pro 500 MFP M570dw Colour Laser Printer

I've cleaned the transfer belt and roller. I've emptied the excess toner container. And I've put in new hp toner cartridges in the printer.

1 reply

by rproffitt edited

Keep in mind this is a very old printer from about 2017. These are usually replaced as parts costs start to approach replacement cost of a new printer.

https://www.youtube.com/watch?v=9T7vlMQLdls for example. There may be a video for your exact model but I leave that to others.

This discussion is closed to new replies.