9 replies
by krystal190
Working off of your theory that the problem is the USB driver...try this.
? Most USB drivers require the drivers that came on the CD that accompanied your motherboard. A Windows XP driver will not do.
? Insert the motherboard CD, manipulate through the council, then install the USB driver.
? Reboot your computer.
? If the problem persists, confirm the driver is that from the motherboard CD, and if need be uninstall the printer software, then reinstall the software.
Note: I've noticed several times as I work with installing drivers and software that a sequence of events make a world of difference so check the readme file located on the motherboard CD for further installation instructions. Also, once an installation is "botched", the best tactic is to completely remove everything, including unplugging the printer from the computer, and starting over from scratch.
by bpd640
by hal 9000
Well first try a different USB Lead as the one you have could be damaged. Asa you have already tried this on a different computer with the same effect you have either a faulty set of drivers a faulty USB Lead or a Faulty Printer.
The On Board USB require their own drivers but provided that other USB devices are working properly the existing drivers should work the printer. Since this is not confined to just one computer but to the 2 that you have already tried it on you'll have to start working with known good components and at this stage your only option is the USB Lead. If that doesn't cure the problem it sounds very much like a dead printer which needs to be returned to the seller for replacement.
Col
by bpd640
Please see my above comment. Thank you for responding.
by rickrbyrne
I agree with Col and think you have a dead printer, its not very likely that it is the USB driver if you have tried it on another computer.
Rick
by hal 9000
Well since you have eliminated the printer and reloaded your computer the most obvious thing would be to go to Dell's web site and download the newest drivers for your computer and install them.
I would also look in the Device manager to see if there are any devices not working properly. Right Click on My Computer and chose Proprieties in the drop down menu and then left click on the Hardware Tab and then once again on Device Manager. When that window opens look for any devices with a yellow circle and a Black exclamation mark in them these devices are not working or at the very least do not have a driver installed. As this is a Dell unit you should be able to use the Recovery CD to install the driver that came with the computer but if you have downloaded the latest drivers you can point to the folder where you have the drivers placed to install them by right clicking on the marked devices and then choosing Update Driver or Install Driver depending on what your computer is showing.
Once you have everything working you'll need to reboot the computer just to make sure that the drivers are loaded and then once again start off the installation procedure for your printer. With USB printers you normally have to start off the install without the printer connected and connect it at some stage during the install make sure that you follow the directions for installing the printer and it should then work.
Col
by sardukkan
Ok what printer do u have
is the port on the driver to usb
uninstall with the cd
go in the registry and remove vid043d& pid????
it will be under enum and then usb
then reboot
then do a selective start up kill all start up item
then try to install
if this does not work tell me what the error u get
by bpd640
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending