Discussion Locked

Printer mapped to NT clients,BUT not 9x

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have 100 Users who are NT, and 9X users. We have a HP Color LaserJet 5M Printer on our Network. The other day every user could access this printer and today NONE of the Win 9X computers can even see the Network printer. All the NT clients cansee the printer in the Network and print to it, but none of the 9X machines can......HELP. Ive tried downloading the driver for the printer on a 9X machine which obviously does nothing since what we are trying to do is setup up a Network printer and browse the network for the printer. Is their a setting on the Server for 9X machines or something?? Im running a 2000 Server.

3 replies

by bgreenwood10

Has anything changed?

I had this problem a long time ago but right from the get go no 9x boxes could see it. I ended up changing the name on the printer so that it was less than 8 charecters. That fixed my problem.

by remeltdb

BGreenwood is correct that win9x won't be able to browse for the printer if the name is longer than 8 char. In the past, though, when I have seen this problem we could still map to the printer if we typed in the UNC name for the printer rather than browsing for it.

by hoggin

Within Windows 2000 Server you have the ability to load the drivers for the printer for other OS's. If you have the printer shared via NetNIOS then that could be your problem. Sometime 9x doesn't like seeing Win2K's NetBIOS. If the printers are actually remote printers and you are using IP to connect to them, then you can try connecting a 9x box directly to the IP address assign to the printer.

When it comes to pronting there can be various reasons why they could be there one day and not the next.

You may want to check out some articles on Microsoft's site and see if there is anything out there. I think that I have heard of an official statement from Microsoft regarding this same issue.

Hope this helps.

This discussion is closed to new replies.