CAUSE: This problem is usually due to a data signal generated through the PC's parallel port during the computer's power on self-test, or while restarting Windows 95 or Windows 98. In most cases, the data signal being sent determines if a particulardevice (or type of device) is attached to the parallel port. When the printer receives a string of data that it does not recognize, it will attempt to interpret the data and assign a character for the unrecognized signal. This results in garbage characters or symbols printing on the page.
WORKAROUND: Change the parallel port mode setting in the PC's BIOS. HP recommends either ECP or bidirectional port mode settings; however, other settings may work, as well. For information on changing the parallel port mode on this specific PC, contact the PC hardware manufacturer.