Question Locked

Printer sharing problems

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Help! I am trying to set up a printer share using our wireless connection. I have my base computer connected to the printer itself. I used the MS Wizard to turn on the sharing on both machines. I made sure all the computers are in the same workgroup. Yet, when I browse to add a printer through our connection, I only see the name of the actual computer I'm using, not the one I would like to share.

Any suggestions?

THANKS!

8 replies

by toivo talikka

When you go to Windows Explorer and select My Network Places - Entire Network - Microsoft Windows Network and expand the name of your workgroup under it, do you see both computers listed there?

Can you ping the base computer from the other computer? Start - Run - cmd - and type ping followed by the IP address of the computer. If the ping gets a response, you are connected.

You only need to have 'File and Printer Sharing' on the base computer, unless you want to share folders on both computers.

Have you shared the printer itself? If the printer icon in your base computer does not have a hand at the bottom of the printer icon, it is not shared.

Right click the printer icon and select Sharing, then click 'Share this printer' and click OK. If everything else is all right in your wireless network, you should now see the printer when adding the printer on the other computer. If not, select 'Connect to this printer..." and type in \\ (two backslashes) followed by the name of your base computer and one backslash.

by sharonmor73

Hi Tovio,

Thanks for your insight! Few comments/questions:

1. When I was in the Windows Explorer I was able to see my workgroup, but when I tried to expand it I got this error message: "[workgroup] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found." How do I grant networking permission to this machine?

2. I would love to try to ping the base computer. Few questions: after going to start-run do I type in: "cmd" and then the IP address? Also, I don't know how to locate the IP address. Can you walk me through that?

3. The printer itself is shared and has the hand icon below it.

You comments were really helpful. I feel like we're almost there!! Thanks so much, Tovio.

by toivo talikka

The simplest way to get the IP address is from the command prompt Start - Run - cmd by typing in ipconfig. If you need more info, type in ipconfig /all.

Both PCs need to be in the same subnet, in other words, only the last part of the four part IP address can be different: Example:
192.168.1.2
192.168.1.5

The subnet mask must be 255.255.255.0.

The Default Gateway must be in the same subnet.

You can also get the same info from Control Panel - Network Connections, then right click the Local Area Connection, select Status, click the tab Support and then Details (much more complicated, isn't it).

From the command prompt you can ping by typing in ping followed by the IP address of the other PC. If you want ping 20 times instead of 4 times, you type in (IP address just an example)
ping 192.168.1.3 -n 20

By the way, which version of Windows are you using on each of the two computers? XP Professional or XP Home?

Are you by any chance running something like Norton Internet Security on the PC to which the printer is connected?

Here is Microsoft's suggestion how to fix a similar problem by making sure the Guest account is turned on in the computer that the printer is connected to:
http://support.microsoft.com/kb/915107

by sharonmor73

Thank you so much for your diligent follow up to my questions! It's now working.

Thank you!!

by rodolfo_ma

I have a laptop that is running XP-Pro. My base computer is a desktop running XP-Pro. My girlfriends Laptop is running XP-Home. I am trying to print from my laptop to the base computer printer. I have been very unsucessful. Her laptop printed and sees the base computer on the network with no problems. The base computer can see her laptop as well as mine, but when i click on my laptop, it gives me, the whole "it is not accessible" jive. I don't understand why her's worked any mine didn't. Please help as it is driving me insane.

P.S. When i try to view the network on my laptop. It tells me it is also inaccessible. I have run the network wizard on all computers involved to no avail. Please help!

by rodolfo_ma

i found another site that helped me out, and it told me to add the IPX/SPX PROTOCOL for the old netware software. Granted, they also said that was not the right way to solve the problem, it worked, since all I want to do is file share and use the printer. They gave a registry edit suggestion to help fix the solution. It is at this site: http://forums.whirlpool.net.au/forum-replies.cfm?t=441615&p=2
They weren't helping my problem specifically, but ultimately they did fix my problem.

by ashleymoat

Hi. I have 2 computers in the house. The main desktop which has a USB printer (HP PCS 2350 series) and a laptop. Both PC's are running Windows XP Media Centre Addition. I can connect to the Internet of my laptop. I can also view each of the computers shared documents from the other computer.

Now with the printers. I start by adding a printer on my laptop, and then searching on the network. I find the printer no problem, all good. Click connect and no luck. A Message box pops up saying Windows cannot connect to the printer. Operation could not be completed.

Both computers firewall is set to allow file and printer sharing.

If anyone can help it would be most appreciated.

Thanks

This discussion is closed to new replies.