Question Locked

printers

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
my new printer has no printer port,how do i install one?

7 replies

by markp24

Hi

most printers today are USB only and no longer have a parrellel port (ie printer port) depending on the printer and its manufactuers recomendations, you might be able to they a parrallel to USB converter .

by robo_dev

break out the drill and soldering iron. Drill thru the case approximately 2" above the main circuit board.... :)

by jdclyde

make/model and we will be better able to answer your question.

by oh smeg

Because I've never see a WiFi Only Printer but assuming that your New Printer is WiFi only you'll need a WiFi Connection to it.

The current generation of Printers have one or more of these Connectors USB by far the most common, Ethernet can be seen alone but generally in conjunction with USB, WiFi again it could be WiFi only but generally in conjunction with USB.

If you are asking how you fit a Suitable Port to your Computer that doesn't have WiFi, Ethernet or USB the easy answer is to fit a suitable Card to the computer.

As to what type of card that would be it all depends on what you have as a computer as Note Books have a different Attachment Point to Desktops. ;)

Col

by databaseben

new printer? contact the manufacturer for assistance.

by sarfaraz.chougule

You will either have USB or WiFi connectivity options available for your new printer. It will be easier to assist, if you could share more details about your printer (like make and model).

http://www.thesarfaraz.com

This discussion is closed to new replies.