Discussion Locked

Printing

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have one HP Deskjet printing to lpt1 and I have one Citizen 200GX printer with a printer cable with one end that plugs into the game controler port. I need to know how to make this work. Using windows XP

11 replies

by dklippert

The Citizen 200GX is compatible with the Epson EX-800. Windows XP has built-in support for for the Epson.

by cgi¤001

I dont know (I am doubtfull) you can make it work on the game port. But, I might some come up with the solution. If not, I suggest to get an additional Printercard installed.
Those interface cards are cheap and effective. But, again somebody might come up with THE solution as you asked.
Just in case....

by awimsatt

You can go to Walmart and buy a cheap $20 LPT port splitter that will allow you to install both printers on the same port. you just have to move the switch to print to one or the other. Hope that helps.

Adam

by awimsatt

Well,,, There are also converters that you can buy that convert serial to parallel.
Follow these links (as always... remove spaces) Some of the links are kits:

http://www.airborn.com.au/ab210.html

http://www.eece.ksu.edu/~eece696/beta/digital/A/stop.htm

http://www.sc-systems.com/products/adaptors/serial_parallel.htm

http://www.rad.com/products/family/mic-spx/mic-spx.htm

http://www.bb-elec.com/bb-elec/literature/manuals/m232sps2.pdf

http://www.engineering.sdsu.edu/~mansour/labs/p2s_s2p_vhdl/p2s_s2p_vhdl.htm

BTW, if you reject this answer... please leave some comments on why you rejected it so I can help you find a solution that works for you.

Adam

by mikez1017

This is really something that I just wanted to try and make it work. I have this cable that was just lying around. It has one end with a printer connection and the other end has a connection that plugs into a port like a game controller. And I wanted to see if I can make it work.

by awimsatt

The cable that you have laying around sounds like a serial cable. Older serial ports had 25 pins and are just the opposite sex of a parallel port. Null-modem cables also have that configuration. 'Fraid neither cable is configured correctly for your situation. The pin-outs are completely different then what you need. Now, you mentioned that the opposite end of the cable looks like it would fit a game port. In that case... you have yourself a cable that would go onto some special device or is made for a different arcitecture. I have never heard of hooking a printer up to a game port and I cannot find any information about it on the net.

Adam

by mikez1017

Well Thank you for all your help I did end up giving up with that. I just bought an a/b switch But thank you anyways.

This discussion is closed to new replies.