Discussion Locked

Printing - Banner/Seperation Pages

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win98 machine on a rather old Novell 3.12 network. There is currently about 50 machines on this network, but for some unknown reason, one machine in particular has a Banner and Seperation page come out on the printer every time anything is printed.
I have looked at the printer properties on this machine, but can't even find where to turn off the Banner page.
Any help advice would be greatly appreciated as the user comes to me on a daily basis to see if I have found an answer.

Howell Rees

16 replies

by sheryl v

I'm assuming it is a network printer we're dealing with. Have you tried updating his/her printer drivers? (Uninstalling the printer and then reinstalling it using have disk with the latest Win98 drivers from the vendor)
P.S. Is it all applications or just Microsoft ones?

by alpha-male

The banner printing is a default setting in NW 3.12

You can turn it off using the nobanner option when configuring your printer.

If you used the nobanner command in netware, then check your print driver options in your OS to make sure it is not enabled there.

Here are a couple of resources you may find helpful:

http://www.compaq.com/products/printers/support/docs/printserver/install_manage.pdf

http://support.novell.com/cgi-bin/search/searchtid.cgi?/2912696.htm

Good luck!

by dpaff

In the Windows 98 printer properties should be a tab titled "Printer Settings". Select it, then in the middle should be a section titled "Banner settings". Deslect the box for "enable banner".

by krunch

Hello,

Right click on Network Neighborhood, go down to Properties, hilight Novell Netware Client and click on Properties. Next go to the Default Capture Tab properties and you'll see the check boxes with checks in "Form Feed" - uncheck that - if"Auto Endcap" is checked then uncheck that and finally if you see "Enable Banner" is checked, why then uncheck that as well to disable the banner page. Hope that helps!

Cheers,

Krunch

by tbragsda

If your caputreing from a login script,

capture q=qname /nt /nb /nff

nt=no tabs
nb=no banner
nff=no form feed

by pmirlekar

on problem machine go to msdos prompt .type CAPTURE/SH it will show u if banner is enable.
check just after u login . also check while any s/w is running

This discussion is closed to new replies.