Discussion Locked

Printing on NT NW

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Sometimes we lose the printer connection and have to reboot the w/s. this will correct the problem, but I don't know why this is occurring. It happens with 2 n/w printers.

13 replies

by bwills

First a couple of questions!
1. Are the printers connected to a PC, or do they have network cards (Jet Direct) etc?
2. Are you losing a network connection or just connection to printer?
3. Is the workstation that is being rebooted connected to the printers.

If the printer is attached to a computer, check to see their is sufficient space and the computer is not continully locing up, from too many print jobs. Try stopping and starting the spooler service rather then rebooting if the jobs are not going through. Hope this somewhat helps. Brian

by chall

I am not sure why it does it, but have you tried going to Control Panel > Services > Spooler. Stop the sppoler, wait a few seconds and restart the spooler.

It is not a great answer but from time to time we have to do this on out Servers.

by chall

Look for services and then spooler, you don't have to be able to see the printer. This may bring the print services backup. Have you looked at the event viewer?

by lagilmore

Printers are connected to n/w by jetdirect cards and are shared out. Printer doesn't appear in Control Panel-Printers until w/s is rebooted.

by dlw6

Something may have happened to your JetDirect drivers. You might try reinstalling them (i.e. remove and reinstall the printer via Control Panel on your workstation/server).

Good fortune,
Don

by james_randy

If you are still tackling this problem, perhaps you should consider calling your local super-hero.

by tjc

make sure that the printers are not turning off - some laser printers will disconnect them selfs and not wake up. Also check you install any printer driver updates.

This discussion is closed to new replies.