7 replies
by bart777
One thing you might try is to do a Novell Print Capture.
Right click on the red N in the system tray and select the Novell print capture. Then bind the port to LPT1.
Once you have the capture done you can also play areound with the Auto Endcap settings and see if that helps.
If the above steps still do not resolve the issue, try reinstalling the latest client with NDPS if you are setup for that.
Good Luck..
by psyduck
by jskalski
Hi,
You can try updating to the latest version of Dcom for Win95 or 98 depending on your OS. We have found in our K-12 school district that sometimes novell printing problems are related to older versions of Dcom on the workstations. I am assuming that you are running Win9x as your OS. You can download this from the Microsoft support site. Good Luck
by psyduck
by dragon_45
Watch your capture commands. Are you capturing lpt1, lpt2, lpt3 etc. Most local
printers are set to lpt1. Check your pconsole. Are their jobs being placed in the queues? Is that queue attached to a printer? I only had experience with the version 4.1 Novell. But, I assume their still is printcon, pconsole functions or just renamed functions.
Good Luck
Richard Bolha
Dragon@one.net
by psyduck
by psyduck
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending