Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
1. Printer is share in work group LAN.From other machine when printer is connecting its work but after 4-5 hours later the printer was disconnected and it can't work.At that time,printer are connected in which machine at that machine,disable the LAN then enable or restart the machine,then its work.Please suggest the solution.In this machine Quick Heal license antivirus install.Operating system XP-SP2 installed in all machine.
2 replies
by sanjoy.paul49 Accepted solution
Clarifications
by robo_dev Accepted solution
1) check power management settings on PC and on network adapter on PC.
If PC is going to sleep, it will not print. Make sure PC is set to 'always on'.
Make sure that 'Allow Windows to turn off this device to save power' is not checked.
2) Use static IP address on PC that shares printer. If IP address changes, or even if DHCP lease is renewed, Windows may not see the share properly.
3) If using DHCP, set lease time to much longer than four hours (8-12 hours would be best).
This discussion is closed to new replies.
Trending Peripheral posts
Sort by Trending
0 helpful
4 replies
Question Locked
I need to know what port-type this is (What the plug is called)
0 helpful
3 replies
Question Locked
Are ink printers worth it in 2025, or are there better options?
0 helpful
4 replies
Question Locked
My PS5 controller wont connect to my desktop help?
0 helpful
8 replies
Question Locked
Fusion5 charging
0 helpful
2 replies