Discussion Locked

Printing to Lexmark Optra T or S series.

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are experiencing problems with printing from W95b to Lexmark Network printers when printing from certain apps. We are using Dell GX110 machines, when printing from WordPad, Lotus 5 or GroupWise 5.5, you can only print once, after that you get an error and then must restart the application. When changing the printer driver to a Lexmark Optra R +, then(in some cases)it does solve the problem. - our printserver is an OS2 Lan Manager server.

11 replies

by armando5

I currently work at a school district with the same equipment you use and the same printers what kind of lexmarks are you using.? model numbers please maybe I can help

by armando5

I currently work at a school district with the same equipment you use and the same printers what kind of lexmarks are you using.? model numbers please maybe I can help

by rogerndgreen

You don't give enough information for a more definitve answer, but go to the appropriate Lexmark site for you (if in doubt use the US) and make sure that you are using the latest version for MarkVision to set the printers up, the printer network cards have got the latest firmware release (IIRC it is 3.4.17 for Optra T, using the MN2000e network card, but check the site!) and your workstations are using the latest Lexmark drivers for the correct printer, your workstations have all the approved "critical updates" that are on Micorsoft's site (windowsupate.microsoft.com) as just the service packs isn't always enough for Lexmark printers.
Also check for any duplicate DLL files on the PC and network, particularly ones with different versions.If you get stuck looking for any particular files, mail me at rogerndgreen@lineone.net & I'll try to help.

Roger Gren

by turbomac35

You can call Lexmark TS and have the dispatcher connected you to the Windows/NT group or the Laser Hardware Group 4 for technical support. They are opended M - F 9AM - 9PM EST, S & S 12 - 6PM

This discussion is closed to new replies.