Discussion Locked

Printing to Netware printer while dialed

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are running a Novell Netware system (5?) for our LAN. We also dial out to an external system via a 3rd party dialer (IBM/AT&T global dialer). Both LAN and dialup are configured for TCP/IP. My question is how can I print to my network printers while dialed out. Theoretically, each TCP/IP binding should be to handle seperate request, (I've seen it work before), but I am not sure of how to configure it so. Any help would be appreciated. Thanks in advance.

J-Man

3 replies

by cwilly66

J-Man

I don't know if you have a pure IP environment or not. If so, try loading IPX on the local machine and the remote server. I experienced the same problem that went away when I did this.

Hope it help.
Cwilliams@divsys.com

by tomjockers

The problem is usually the computer gets confused as to which path to use for the local network.

On Win NT at the command prompt type route add -p "local network" mask "network mask" "default router"
Example ?route add -p 172.16.64.0 mask 255.255.255.0 172.16.64.1?
On win9x it is the same except there is no -P (persistent) switch so the route will disappear each time you reboot. For Win 9X I create a BAT file and run it from the startup menu or the run registry entry to make it persistent.
Also just type, ?route? to get more info

This discussion is closed to new replies.