Question Locked

Problem in configuring dhcp on 2 vlns

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have got 400 users in a network with one DHCP server but as network limitations i con't put more than 254 users on one dhcp.i have one cisco 2950 switch.so plz tell me that is it possible to have two dhcp on one network over different VLANs.

If this is possible than tell me how.

Regards

FIroz Khan

2 replies

by bob.hunt

Assuming this is all in one location, are you talking about 254 users on a subnet? That would be true if you are using a subnet mask of 255.255.255.0 on a 192.168.0.0/24 network.

Disclaimer: I'm not an expert on IP Subnetting. I always figure there are places to lookup what I need. Even some IP calculators.

http://jodies.de/ipcalc?host=192.168.0.1&mask1=23&mask2=

So let me continue on what I believe to be true. I invite anyone to correct me if I'm wrong. I hate giving out wrong info. Here goes.....

If you use a 192.168.0.0/16 network, you use a subnet mask of 255.255.0.0 and the private Class C addresses of 192.168.0.0 - 192.168.254.254, you now can have one large network of about 65534 clients.

No need for any special router, etc. (although 65,000 on one network would require a lot of swtitches, etc.)

So in your situation if you used a 192.168.0.0/23 this would yield you 510 usable addresses, something like:

192.168.0.1 - 192.168.1.254 with a subnet mask of 255.255.254.0

VLANs are typically used to separate servers and clients, or departments.

If you want to separate your network, you could use 192.168.0.0/22 and a subnet mask of 255.255.252.0

This would yield 192.168.0.0 - 192.168.3.254. You could put all your clients on 192.168.1.1 - 192.168.3.254 and your servers on 192.168.0.1 - 192.168.0.254.

Take a look at the link I provided above and play with the third octet. If you start your network with 192.168.20.0 and 255.255.252.0, the you would have a network with a range of 192.168.20.1 - 192.168.23.254

This discussion is closed to new replies.