5 replies
by mking2k Accepted solution
by 93961 Accepted solution
by peconet tietokoneet Accepted solution
Then go into the bios an find "PCI/AGP-Onboard" and mark it "disable", then go to "Exit" and select "Save settings", now fully shutdown the computer for 15 seconds. Start up after this time and load on the drivers for your video card.
Please post back if all goes well or not.
by oh smeg Accepted solution
Some of the newer M'Board Chip Sets don't support all of the currently available Video Cards. Also some Video Card Makers may use different functions of what is available with Video Chip Sets.
I have had instances where a Model of Video Card from one Maker doesn't work with a M'Board where as a Different Brand of the same Chip Set does or a different Model from the same Maker works perfectly well with that M'Board.
If the AGP Card is correctly inserted into the socket and you are not getting any Video or the system is not booting you will most likely need to try a different Make/Model of Video Card.
Col
by oh smeg Accepted solution
I've seen a couple of instances where poor case design means that the AGP Video Card is not fully in it's socket when it appears to be correctly fitting the case.
You may need to remove the Mounting Bracket and see if it works that way to rule out the case holding the card out of the socket.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending