5 replies
by statykserver
by statykserver
by gary56789
With the second monitor attached, go into the display properties (advanced--click on the tab for your video card--change the display to go to the laptop and not the external monitor--apply/ok. (Fn + one of the function keys, usually F8 also should change which monitor gets the display.)
If this doesn't work, download the video drivers from the HP web site to the computer (remember the location), uninstall the old drivers in Device Manager (right-click My Computer--select Properties--click the Hardware tab--click the Device Manager tab--expand Display adapters--select your video card--right-click the adapter and click uninstall--reboot.
When the monitor shows the Add New hardware wizard, manually tell it where the newly downloaded drivers reside and finish the wizard. Hopefully when this is finished, you can go back into your advanced display properties and select only the notebook to send the display to. If the display doesn't appear properly on the laptop, click the Comment button to let us know what happened. (If still no display, probably the LCD mnitor is faulty. You will need to check with HP to see if a replacement is even available.)
by drat53
by wimpee
I agree with the 4th answer, it is most likely a bad inverter board OR bulb, hence the indirect light you provided via a flashlight allowed you to see the display, though dimly.
If it were simply turned down or a driver issue, then a flashlight would not have assisted you in viewing, even dimly, any display.
The part IS a replaceable part if you are technically inclined. If you are not, then your options are to take it to an HP authorized service provider or search for another laptop on an auction site and swap the hard drive.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending