Discussion Locked

Problem Win. 2K professional and Internet Connection

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When my modem connects to the internet it does all of the right things, checks my user name a password etc.. Then it tells me that it is logging the computer on to the network at which point it crashes and the system has to be rebooted. The point is there is no network. It is a stand alone machine in my home. I have stuck four modems in the machine with the same results, so it is not the modem but the way Win 2K is handling the connection. How can I stop it from looking for a network? Any help would be appreciated.

4 replies

by jeff1126r

WIN2k is notorious for crashing using pci or on board modems. Make sure you're using the proper driver for the modem you have, ( i.e. reinstall the driver if you haven't already, using the manufacturer's software provided w/ the modem, don't rely on Hardware wizard to provide you w/ the correct driver). The best solution I found when running on dial-up w/ a WIN2K machine was to just buy an external modem (I know,,cheesy and out-dated), and I never had a problem afterwards. good luck.

by wjbradley

Thank you, that must be it. I have two external modems and both of them have fizzled. But if memory serves, it worked OK with the external modem.

by bobjayne

Been a while since I played with win2k but under 98 the log on to network was under the connections properties.
Right click on the connection and choose properties.
Setting up a win 98 system logon to network was disabled also any network protocols that weren't required.The only one needed tcp/ip.
Make sure nothing under modem properties checked that could cause a problem.

by wjbradley

Thank you for your reply but I have gone over these suggestions more than once. I think the solution lies in an external modem.

This discussion is closed to new replies.