27 replies
by samuil_alexov Accepted solution
by older mycroft Accepted solution
Since the CPU in the Acer has the capability to throttle-back until required, you can be guilty of 'setting everything to max' but then checking the processor speed while it is NOT actually doing anything substantial.
Try starting a graphically intensive game [i](maybe something you know tends to run slow - the processor will be running a max capability then)[/i] then hit the Windows key to get back to your desktop.
NOW check what speed the processor is running at! :)
by samuil_alexov Accepted solution
by samuil_alexov Accepted solution
by rob miners Accepted solution
by samuil_alexov Accepted solution
by rob miners Accepted solution
Have you installed it and it is not showing. Or are you asking how to install it.
Some applications in Add/Remove Programs list are missing Change and Remove buttons ?
When you open Add/Remove Programs applet and click an application entry, you may notice that the Change, Remove (or Change/Remove) buttons may be missing, thus leaving only the application name entry there (Fig 1). Here is a method to make Windows show the Remove, Change (or the Change/Remove button together) buttons in the listing. (Fig 3)
RESOLUTION
Click Start, Run and type REGEDIT. This starts the Registry Editor. Navigate to:
HKEY_LOCAL_MACHINE
\SOFTWARE
\Microsoft
\Windows
\CurrentVersion
\Uninstall
\
here is Cool and Quiet - Taken as an example
In the right-pane, do the following:
Double-click NoRemove (REG_DWORD) and set it to 0
Double-click NoModify (REG_DWORD) and set it to 0
If NoRemove is set to 1, the Remove button will be unavailable
If NoModify is set to 1, the Change button will be unavailable
Final result is you'll get the Change and Remove buttons back (Or, the Change/Remove button together)
by samuil_alexov Accepted solution
Cool n Quiet is a function of the AMD CPU and it goes even if you don't install the Cool And Quiet AMD software it only needs the processor drivers.I don't have it neither in the registry.I need you to give me other solutions please.
Thanks for the help guys i really apritiate that :P
I think the solution might be in :
-setting a registry value that disables the power options.
-setting a registry value that disables CNQ
-permanently uninstall the processor drivers and disable the automatic install by windows
-get something like custom bios if they exist :D
-3rd party program that disables CNQ
Tell me what do you think and how to do it , thanks in advance and to the other ppl that already tryied to help me
by rob miners Accepted solution
by samuil_alexov Accepted solution
come on guys it's full of brains in here and guys thinking like 000100100 :D
you can't just let it go like this
and it's a Mercedes when it goes on full speed :D :P
by samuil_alexov Accepted solution
by rob miners Accepted solution
can't overclock it as it would probably melt. If you follow these instructions it may or may not give you extra performance. If you really want to play highend games get a PC.
by samuil_alexov Accepted solution
by rob miners Accepted solution
to change from ACPI to STD
Select "My Computer" with the right mouse button.
Select "Properties".
Choose the "Hardware" tab.
Click the "Device Manager" button.
Select the entry under "Computer" with the right mouse button. If it says "Standard PC", then there's no need to do anything.
Select "Properties"
Click the "Update Driver" button.
Choose "No, not this time" and click "Next".
Choose "Install from a list" and click "Next".
Choose "Don't search" and click "Next".
Click "Next".
Choose "Standard PC" and click "Next".
Continue clicking "Next" and reboot.
< It could end up a one way street.>
by computercookie Accepted solution
are you trying to say that when there is a demand for services that the CPU won't step- up or that when you're goofing around and there is no demand you decide explore these settings hoping to wreck the laptop?
You haven't even described what power settings you're using currently! If you want to halve your battery life keep on exploring>
by older mycroft Accepted solution
Having reviewed your initial post again, indeed the rest of the thread and ALL your insistent answers, I reckon that you are hysterical about this 'problem'.
I am particularly curious as to how you can be so emphatic that my initial suggestion has already been tried and failed. What EXACTLY were you running in order to check the CPU under heavy conditions?
I have been using an Acer Aspire 1363 for three years now: it has an AMD Sempron 3000+ which under load runs at 1800MHz, throttled back it runs at 800MHz.
I've just checked CPUID while the Acer is running it's AVG system scan. The CPU is currently running in both modes ~1800MHz/800MHz~ while AVG is scanning the HDD. I've just seen it run at 1600, 1400, 600, 400, right down to 0.6MHz.
I suspect that whatever method you used for checking the speed of your AMD CPU, you never gave it sufficient time or chance to return a viable result! - I am watching the CPU speed throttle back and increase and throttle back as I type!
I would also add that in 3 years I have never witnessed any AMD software that could be removed.
What you are suggesting is akin to removing Speedstep or HyperThreading from the old Pentiums.
Check it again - for longer than a couple of seconds, preferably while running an anti-virus system scan. :)
by older mycroft Accepted solution
This seems to talk you through it:
http://www.vista4beginners.com/power-management
Odd that most sites are "How to [u]ENABLE[/u] it", don't you think?
;)
How much RAM have you got in this "[i]AMD Turion Mobile x64 TL-50 Dual Core .. ..Windows Vista Ultimate 64 bit[/i]" system ?
by samuil_alexov Accepted solution
what i use is and AMD CPU monitor to check the speed.i'm not just trying to wreck my lap top it goes to 800 mhz after 5 6 mins that i use it and sometimes passes to 1600 for 20 secs.so i can't do anything on it i can't even watch a movie.i mount a 2 gb ddr2 ram.
excuse me for me replies but i just can't stand it anymore with this slow lap top.thanks for the help.if u get anything post it thanks guys
by samuil_alexov Accepted solution
by older mycroft Accepted solution
Now, straight off, I could be wrong about this:
1. You are running with an AMD chip that is dual-core AND 64-bit
PLUS
2. Your operating system is Vista AND the 64-bit version.
When your monitoring software reports a speed of 800MHz is that overall or per core? If it only reports the speed of the core that is being monitored, your overall speed is DOUBLE that!
Also, Vista in its 32-bit incarnation is dreadfully memory-hungry.
I don't know why you are running the 64-bit version of Vista, but you have BARELY enough RAM to run the 32-bit version of Vista.
You should have a minimum of 4GB of RAM (that is [b]MINIMUM!![/b]) because 2GB of RAM has no 64-bit addresses AT ALL!
You are strangling your 64-bit system by restricting its scope to that of a 32-bit system.
No wonder it seems slow. ;)
by samuil_alexov Accepted solution
man look i'm apritiate u're trying to help me but let's go back to the main problem how do i disable cool 'n' quiet i remember u :
-no bios option
-no 3rd party software to disable it
-it doesn't disable it neither when i put it on max power options
-when i uninstall the processor driver it installs automatically
by older mycroft Accepted solution
It seems to me that the whole scenario of which machine, which chip, which OS - none of it matters to you - all you are interested in is disabling something that most of the rest of the computer fraternity is wanting to turn on.
You've already admitted that the CPU speed does in fact hit 1600MHz at times - "[i]it goes to 800 mhz after 5 6 mins that i use it and sometimes passes to 1600[/i]".
https://www.techrepublic.com.com/5208-7343-0.html?forumID=101&threadID=261134&messageID=2482203
You are ignoring the fact that you are running with a chip that is double the processing capability of most users on TR, and you're simply not interested in anything anyone offers you if it doesn't have ALL the words that are on your little script-card.
The very fact that you apparently choose to ignore the fact you have way too little RAM tends to suggest to me you are an idiot!
This is either a wind-up, or a deliberate attempt to confabulate, or you are technically-blinkered, or just plain insane.
Whichever, I for one have had enough!! :p
by samuil_alexov Accepted solution
just stop posting about what i have and what i don't what i care about is how to disable it so if you don't have any solution don't post coz u just posted like 13 reply about how good cnq was and how vista 64 ain0t for my lop top i don't care.
have the solution ? post the ELSE there's a X in the top right corner of your window just click there
by thumbsup2 Accepted solution
In your previous post, you said "[i]about how good cnq was and how vista 64 ain't for my lop top i don't care.[/i]"
Sometimes, there is NO solution which will do what you want to do. People are trying to tell you this is the case in your situation, but you won't listen. There is NO reason to get snippy just because you don't like that answer and don't care that your system isn't up to the task.
Feel free to take your question elsewhere IF you think a different solution IS available. People HERE have already answered you based on their knowledge of the situation. If you have more details to add which might be relevant, feel free to post them. But, as far as we're concerned your QUESTION HAS BEEN ANSWERED.
by dumphrey Accepted solution
is not really disable-able. Mycroft is right about your RAM too.
I would update all your drivers (cpu and chipset primarily)from the manf.s web site (also look for bios update)and then, if that does not work, return the computer as defective. This kind o power management should just work at this point in Windows.
There is nothing to uninstall.
In the bios, look at cpu settings etc, it may not be labeled as cool and quiet, but power saving or throttling.
In windows its self, what power management settings are you using? You said max, but is that for on battery or plugged in to the wall? (2 different settings).
by samuil_alexov Accepted solution
by dumphrey Accepted solution
are you referring to the FSB multiplier or the hyper transport speed?
So what was your solution?
This discussion is closed to new replies.
Trending Smartphones posts
Sort by Trending