Discussion Locked

Problem with HP deskjet 870 drivers and

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When the Deskjet 870Cse drivers are loaded on an NT machine with SP6a (Service Pack) Word slows way down. It happens with Office 97 and 2000. I only have to select the DJ870 (Deskjet) as default and things slow down. If I select any other printer asdefault Word is ok.

I have removed and reinstalled the printer and drivers. I have also taken the NT computer down to SP5 and reinstalled the printer and drivers. I still have the same problem. I only have to select the 870 as the default and Word is a slug!

2 replies

by spiceman

I hope you are using the latest drivers - if not go to: http://www.hp.com/cposupport/swindexes/dj870cz_swen.html

Other causes:
1. The HP ColorSmart driver is set to Best and Glossy or Transparency paper instead of plain paper!

2. The system resources are being used by other applications - close all other applications and try again.

3. The computer system meets the minimum system requirements - enough RAM, free hard disk space and fast processor

4. Bidirectional communication is interfering with the printer operation - need to uncheck the enable bidectional support in properties for the printer.

5. Excessive temporary files can tie up system resources - Delete unneeded temporary files.

6. There are a large number of installed fonts - Control Panel, and Fonts.
Delete any font that will not be used on a regular basis.

Good luck!

by compupop

I have tried all the above and Word is still a slug. Wouldn't the above causes effect all printers attached to the NT computer. I only have a problem with the DJ870Cse.

This discussion is closed to new replies.