Discussion Locked

Problems with Intel 2,8GHz CPU on Freetech P8F155 Motherboard

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been running an Intel 2.4GHz/512/533 CPU in a Freetech P8F155 motherboard for a long time with no problems.

But after I put an Intel 2.8GHz/512/533 SL6PF CPU in the Freetech P8F155 motherboard, and I have had problems booting and have problems keeping the system up after reboots. Re-boots take '1 - n' attempts, after which Windows XP is loaded. But when you excecute some (but not all software) like say Windows Media Manager, the system goes into re-boot mode.

Interestingly, the Intel 2.8GHz/512/533 CPU works just find in a Freetech P8F155P motherboard using the same OS. The Freetech specs for P8F155 motherboard indicate that it, like the P8F155P motherboard, supports the Intel 2.8GHz/512/533 CPU.

According to Freetech support, it has not encountered the problem that I've had with its P8F155 motherboard and Intel 2.8GHz/512/533 CPUs.

Any suggestions on how I might approach resolving this issue?

Thanks in advance.

2 replies

by mjd420nova

Check the mfgrs site to see if they have an up-date for the BIOS. Are you resetting the BIOS for the newer CPU?? If the CPU can do the speed , how about the other chips that were checked to the 2.4Ghz??

by burnsb

Thanks for the response.

Freetech, the motherboard vendor, said the BIOS on the P8F155 board is fine and it supports the Intel 2.8GHz CPU. In fact, the vendor tested this processor on a P8F155 successfully.

This discussion is closed to new replies.