6 replies
by cg it
humm, first is setting up the workgroup. All computers must belong to the workgroup [and not the default workgroup assigned during installation of the O/S]. To complish this, create a name for the workgroup. next is navigate, start, control panel, performance & maintenance [for those using category view [ or system for those using classic view], to get to the Systems Properties page. Click on Computer page. Click the Network ID radio button and run the Network Identification Wizard using the workgroup name you made up. Do this on ALL computers you want in the workgroup. Next is for you to have access to other computer, your account must be on ALL computers within the workgroup as well as anyone elses account that would use a computer in the workgroup and want access to other computers.
Also, tell us if you have any problems with wireless connectivity to your wireless router.
by curlergirl
You have to set up some level of file sharing and permissions on both computers. Have you done this so that the user of comp1 has rights to access comp2, and vice versa? Also - where are the computers getting their IP addresses - from the router? You need to make sure that they are both getting IP addresses on the same subnet and that they are also both set to use the router as the gateway.
Hope this helps!
by sean
by nick_jcn
by kraj923
by kraj923
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending