Question Locked

PSON signal to power supply unstable

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am working on an e-machine T2682 that turns on but on turn off, the computer cannot be turned back on again without completely removing power first. On turn off, the power indication light on the front of the machine blinks. The PSON line to the power supply seems to be unstable on power down, either by front switch or by software shutdown. Symptoms are the same with a replaced power supply.

4 replies

by paul d. masley

rkier, before you do any major disassembly, see if you can boot the machine to safe mode. If you can, disable the hibernate mode. I have 10 eMachines (intel based) in my office. Two did what you are describing. Also, a couple of other things. If that unit is factory fresh, it only has 256 megs of memory. XP likes 512, but loves 1 gig. An upgrade to XP Pro will make it sing.

I have two 3985's that I use as servers and a 2984 as my desktop unit.

by kpak44wh

Rule of thumb, first check ac outlet for current, and then
check power supply. I don't think that it's a regular atx
power
supply, you may have to get one from it's website. I have
had
alot of emachines blow their power supply, so it's really
no
biggi. You have to put the exact type of power supply in
the emachine, that's probably why it won't boot with the
second ps. Another thing, are the white connectors to the
ps on the board, do they look burnt. If nothing else
works, try replacing the motherboard, if you have a weak
or broken connection on the board, once it warms up it , it
loses connection and shuts down. good luck

This discussion is closed to new replies.