2 replies
by curlergirl
In order to access the network resources and have a public IP, you would have to multi-home the computer. That is, you would either have to install two NICs and configure one with a public IP address and one with a private one, or you would have to configure both IPs statically on the one NIC. Two NICs are preferable. Also, your internal NIC has to be configured WITHOUT a default gateway - only one default gateway is allowed per computer, unless you set up static routes, which you don't want to have to do, otherwise you will not be able to browse either network.
Keep in mind that this is an inherently INSECURE situation, and to help protect your internal network you should at least be running a software firewall on this computer.
Hope this helps!
by jdclyde
Typically you will have your LAN something like 10.1.1.0 or 192.168.0.0.
On your router, you assign all traffic to REAL world IP x.x.x.x to go to computer 10.1.1.100.
You then set in your firewall what traffic you will allow in and what you will allow out.
When you do this, ANY computer that can be accessed from the Internet should ALWAYS be put on a DMZ, in case it gets compromised.
The answer is yes. Call the manufacturer of your firewall and they can walk you through this in about 20 minutes.
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending