Question Locked

Public WAP prevent browsing of private network

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I think this is possible, but I'm not 100% sure...

My company wants to provide visitors with a WAP but prevent them from gaining access to our network.

Our network is all WinXP machines going through an in house Win 2003 Server for DHCP and DNS. We also have terminal services running for some thin client pcs.

Here's my thoughts on how to do it: I'd setup a wireless router with a WPA key that we give out per request. I'm thinking that if the router is just using the gateway to get "the Internet" I can manually assign the DNS and IP range to make it so any computer connecting through that particular WAP won't be able to be authenticated on our network.

Has anyone done something like this? Am I on the right track? What am I missing?

2 replies

by robo_dev

You must isolate the hotspot network from your internal network. Using IP addresses for security is not an effective method.

A WAP is a mac-layer bridge, so ALL broadcast traffic on your internal LAN would be visible to a wireless user.

While Ethernet switching and/or VLANs reduce the risk of that somewhat, there is typically LOTS of good info in the broadcast traffic alone, and with ARP poisioning and other techniques, an attacker or trojan/virus infected PC can break out of VLANs and/or sniff other switch ports as well as infect other hosts, regardless of network topology or address.

For example the SQL slammer worm just blindly tried every IP address and would flood an ethernet switch, and it got pretty far with that technique.....

The safest way to provide a hotspot is to provision a DSL circuit for that WAP, and you're done.

There are several other ways which involve captive portals and firewalls, but those require setup and administration.

This discussion is closed to new replies.