Desktop

Ask something
Discussion Locked

question about motherboards

0 helpful
3 replies

by h_raffi

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i asked this question in hardware part but i no body answered me with good answer

Recently I used motherboard PX915-2V 1.0
with : cpu 3000-L1
hdd 80 GB Samsung
Ram 512 DDR 2
Display card 7300 GS 128

But I had a problem with this board, it is when I remove ( memory or cpu fan or display card) the alarm of the mother board is not working ( not beeping continually ) , the spaker of the case is working when the computer start ( beeping )but the motherboard working noramly
I tried to change the motherboard with same kind of chip albatron board the same problem is in the second board so I am asking you about this problem and if it normal or not and how can solve this problem

Best regards
Raffi Hindoyan

3 replies

by cg it

If I read your question right, what you want to know is why the motherboard alarm does not work if you remove the CPU, memory or display card.

I'm not sure which alarm you are refering to. If you mean the BIOS option for open case alarm, the case itself has to have a latch which supports BIOS open case alarm.

by nilt

Without looking up that specific motherbaord, I'd suspect there's one of those annoying "voice alarm" settings in the BIOS that plays errors via the main speakers if present. If so, disable it and see what you get. I've found those "voice errors" very unreliable on most boards.

This discussion is closed to new replies.