Discussion Locked

QUESTION RELATED TO NETWORK NEIGHBARHOO

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a network of nt envoirement. Now I wants that some of the my nt server will not show in network neighbarhood.Not all the machine but some nt server have important data so that machine is not visible in nework neighbarhood

15 replies

by donaldsimpson.co.uk

Hi,
This is all I could get from Microsoft on the subject:

Question:

What registry parameter is used to hide a server from the browser?

Answer:

WARNING: Using Registry Editor incorrectly can cause serious, system-wide
problems that may require you to reinstall Windows NT to correct them. Microsoft
cannot guarantee that any problems resulting from the use of Registry Editor can
be solved. Use this tool at your own risk.

1. Under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

2. From the Edit menu, choose Add Value and type:

Hidden

NOTE: This value is case sensitive and must begin with a capital H.

3. In the Data Type field, choose REG_DWORD and choose OK.

4. In the Data field, type 1 to enable hiding and choose OK.

NOTE: Data field range: 0 or 1
Default: 0 (false)

5. Restart your computer.

Hope that helps, good luck,
Donald

by pinoy

If you don't want your server to be seen over the network, install it as a PDC, then remove its network connection. If you need to connect to it, plug it.

by moflic

Don't share that important data. Or share it to some users only. Or share it with password. Or even the name of the server showing in Network Neighbourhood is important data?

by donhuffman

To prevent an NT box from appearing in network neighborhood STOP the SERVER SERVICE.but then you can't reach data on this machine from anywhere else on the LAN. or you could allow the machine to appear in Neighborhood but only share the Directories that you wish to grant access to. If you are using NTFS you can take advantage of the very nice permissions feature NTFS provides. This is no doubt the best solution most of the time.

by Member 33070795

You want to stop the "BROWSER SERVICE". You are probably better off to lock down the shares using permissions on the shares though. If you stop the browser service the machine will not appear in the browse list of Network Neighborhood.

by joeri

The first proposed answer from Donald is the right one.

We configure all our PC's like this and it works very fine.

Good answer, Donald!

This discussion is closed to new replies.