Discussion Locked

Raid

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have the Abit BD711-Raid M/B
I need to set up the Raid,I have 2 new Maxtor 40GB ATA 133-7500rpm hard drives,they are not formatted,just connected by cables to IDE 4&3 both set as master.To set up for Raid 0 what do I do FIRST. And do I leave theHD which has Windows XP in the PC.Manual states install HPT 37X raid-do I install on existing HD,or on new hD in raid.
Any help would do as a start.
Thanking you,
A.Bradley

1 reply

by bv2

With the HDDs plugged in, insert the XP disk and boot to it. Press F6 when it asks for a driver disk for RAID support, then install the drivers and continue with the XP setup as normal, selecting the drives you have RAIDed together.

This discussion is closed to new replies.