Question Locked

RAID-5 Enlarge Partition

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win2k3 server also running Exchange2k3. There are 3x36Gb drives RAID-5 (hardware) and partitioned to c: d: and e:

The c: (8GB) holds system and a few apps. d: (30Gb) holds data, e: (29Gb) exchange.

My problem is that the c: drive has less than 500Mb of space. Not enough to install SP2 and rapidly running out with each update from MS!

I've been reading around some posts in the forum about how to enlarge a partition, but they don't often refer to RAID-5 partitions. I have 9Gb free on d: and 12Gb free on e:.

Is there a way to enlarge my c: drive that is relativley painless and ideally cost free (small charity, precious little cash)?

I did not set up this server and it's a bit annoying that apps are also installed on the d: and e: drives (i.e. not all in the same place), I've read that ideally the c: drive only holds the windows system, but I'm wary of putting too many more apps on the exchange partition or into the data partition. Anyone any thoughts on that?

I have space for another 3 drives, so in theory could just buy another 3 drives RAID-5 and shift all the data/exchange onto these and leave the original 3 drives for system and apps (oh how I wish!) but cash is the issue there and I still have too little space on the c: drive. Can you have 2x RAID-5 sets together simultaneously? Or would it have to be one big fat hairy RAID-5?

Thanks in advance.
Tegal

8 replies

by scott_heath

RAID configs depend on the controller. Some supprot multiple RAIDs, some do not. Soem controllers would require you destroy the RAID and rebuild it to add space.

Assuming you can extend the RAID without destroying it (many HP\Compaq RAID controllers support this, maybe newer Dells as well) than you can buy software to do the job. But it is not free. Try acronis.com or partition-manager.com

by cannot-bear

Yes, acronis and partition manager can extend the partitions, but the server version is too expensive, for $699 and 299.
In fact, I use partition magic alternative, it works very well. As there is free space on other partitions, you can resize other partitions to be smaller and expand the OS partition. there is a tutorial how to expand RAID 5 partition.http://www.partition-tool.com/resource/expand-raid5-partition.htm

by computerdude

Have a look at diskpart.exe from MS to extend the Windows partition.

http://support.microsoft.com/default.aspx/kb/300415

Obviously, be sure to have full backups as these operations have significant risks if things go wrong.

- Dave

EDIT: after re-reading, it seems you only have one RAID container and want to simply resize the existing partitions. In that case, diskpart should do the trick. Otherwise, you will need something like partition magic.

by sharpseven

Forget diskpart; doesn't work on system disk or disk with pagefile. Doc implies it will work if NTFS (only) disks are dynamic.

by longtail

In fact, after you build the raid array, the OS will detect it as a physical hard disk. RAID card is used to transfer data from disks to OS, or OS to disks.

To solve the problem, you just need to shrink other partitions and expand the OS partition with the unallocated space. You need not to do so much complex works.

Remember that it is better to use an easy and safe SW, huge loss if the OS crashed or data lost. see this article, there is details how to operate http://www.partition-tool.com/resource/partition-raid-windows-server.htm

This discussion is closed to new replies.