Here are a few questions that need to be answered first. What cpu are you using? How many pins are there on each stick of memory?
I am making an educated guess that you are running a Pentium class cpu. If your memory has 72 pins then you will have to populate each bank with two sticks of the same size of memory (each bank will need two 32 bit wide sticks of ram to meet the required 64 bit wide external bus requirement for a Pentium cpu). Not all banks will need to be filled but each socket in any given bank must be filled in order for your cpu to see the memory. If your memory has 168 pins then you will probably have one socket per bank and it does matter which banks are filled and in which order for the cpu to see the new ram. Check your motherboard manual or download a copy from the manufacturer's website to learn which banks to fill and in what order. If you had a single stick of RAM that was working and you suspect the new stick is bad simply remove the known-to-be-good stick and replace it with the new one. Does it work? If not it is bad. If you are unsure let it run for an hour or so and see if the computer has become flaky. Rock solid? Not the RAM stick, probably a bank error or a mismatch between types of RAM. Are theySDRAM or DRAM? EDO or ECC RAM? FPM RAM? SIMMS or DIMMS? These are all considerations. Your motherboard manual and a good tech who can explain all the variations as well as understand what your motherboard manual says is the way to go. Once he shows you then you can show another and we all help each other out.