Question Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i installed 8g RAM on the ibm x series but the properties in the window 2003 enterprise 64 bits show only 3g....anyone plz help me.....
7 replies
by faster.counter Accepted solution
Clarifications
by balthor Accepted solution
Adding more RAM has a lot to do with the BIOS settings.Your computer might recognize the new RAM chips if the old RAM chips are removed.The BIOS chip is a memory chip.Any memory chip will do whatever it is told to do.This means that you can get the chip to function as a RAM or a ROM or both etc.but you have to access that level of chip function.It looks like the manufacturer sets the BIOS to be severely limiting.Adding more RAM will not make the computer run faster.
by faster.counter Accepted solution
can u help me to configure BIOS to see all physical RAM?...thanks
by rkuhn040172 Accepted solution
:)
by ewatt Accepted solution
I would call IBM Support in Minnesota. I know that they are very good. 800-IBM-SERV OR 800-426-7378. Good Luck, Aloha
by rkuhn040172 Accepted solution
Are you sure that's a 64 bit version of the OS?
Sounds more like your running a 64 bit capable processor with a 32 bit OS.
by faster.counter Accepted solution
yes it is 64bit window 2003 enterprise edition SP1
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Locked
Internet connection perfect on PC, not connecting anywhere else
0 helpful
4 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies