Discussion Locked

Rarely Used NIC?

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I got a question from Transcender.
"Which of the following is the least expensive way to improve network performance?
a. install additional RAM on all computers
b. replace all bridges with brouters
c. implement encryption to increase throughput
d. disable rarely used network adapter cards.
Answer: d
Explanation: Disabling rarely used network adapter cards can improve overall network performance by decreasing the number of broadcast packets on the network. Since each broadcast packet must be processed by every active adapter card on the network,the more adapter cards on the network,the longer the connection time."
My comments: It says disable rarely used network adapter cards. Does it mean you just unplug the NIC from your computer?

12 replies

by dc1

Unplug would do it yet if you are going to unplug it to reduce network traffic you might as well uninstall it and save the system resources also.

by mark.dalton

There are a number of ways you could do this.

1) Physically remove the card from the box.
2) Disable the card in the BIOS (Depends on Card and BIOS)
3) Not install it under NT / Remove it from the NT configuration. Right click network neighbourhood select propertied, goto the adapters tab, highlight the card and select remove, say ok, and reboot.

by rdsmith

They mean for you to disable it in the OS by either unbinding it from any protocol or deleting it completely. If you remove the NIC physically from the machine but don't diable it in the OS, the OS will still try to communicate through that NIC.

by kms

Unbinding any associated protocols would do the job. Also be sure to adjust your load sharing settings to take this card out of the hunt group.

Unplugging the patch cable not only will not help performance, but will hinder it further since NT will still try to use the NIC in certain instances (broadcasts of any type) and it will have to wait for timeout in each instance, thus slowing performance further.

by hasse mcse/brainbench

Hi!

This is one of the most stupid questions in transcender and I don't think it will come up in any MCP exam.

Since it's not the NICs themselves who makes a network go down, instead it's the protocols used with the NIC that will make network slower.

The fastest and most inexpensive way to have a full abndwith network is of course by not connecting any computers to it.

But then you loose the whole idea of having a network.

So my answer to dis question would really be disable all protocols but TCP/IP on all computers in the network and install DHCP on a PDC or standalone server.

This way you get best network speed without disconnecting the computer from it.

/Hasse
PS! Very dumb questions and even dummer explanation to correct answer. D.S.

by ghayes

Unplugging/removing the nic from the computer could be time consuming. Try disabling it in Device Manager by right clicking on the network card and going in to the properties. Also, try looking in the BIOS, some computers allow you to turn them off.

This discussion is closed to new replies.