Discussion Locked

Rarely,Suddenly my network becomes slow

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My network becomes very slow suddenly. All the windows client systems in my network is searching for other systems in the network neighbourhood. Rarely, this is happening. This happens during evening in some day and in some other day it is happeningduring morning also.
Iam still trying to Troubleshoot this. help pl...

Thanks & Regars,
P. Sampath kumaran

9 replies

by johan101

Hi
Network Neighborhood anounces itself every 15 minutes so It aint normal network trafic most probably .

Rather check if there aint some other thing , like a florecent light or aircon thats switched on somewhere when it hapens , if the networkcable runs near any of these or any electrical cables that hgas motors or some other high Wattage devices it WILL bring down network performance and even reboot PC s .

So check that and maybe run a network monitor so that you can see where the trafic is coming from , it may just be a user coping some big files over the network ,also try upgrading to switches since it will bring down bandwith usage .

Hope something from all this solves your problem ,
and I will like to hear what worked
Johan101

by opatzg9

You had some other postings out here as well for internet problems. Get a good firewall. Apply all security patches for your operating systems. Its not a safe world out there! Good Luck

by lmayeda

There are 2 things I check when something like this happens: 1) we have a managed switch that allows me to monitor the traffic on the ports and if I see unusual traffic on one or more ports, it is easier to track down the problem. Sometimes it is adefective noisy NIC on a PC, sometimes its someone sending large files. 2) our ISP provides us with graphic usage of bandwidth by the hour, by week or a span of weeks. By monitoring the time of high bandwidth usage, we can determine if there is a possible DOS attack, or some other issue.

by rpj

Seen this when a 10/100 NIC is set for auto and it hooked up to a 10 hub, try setting the speeds on the NIC's to natch you equipment.

This discussion is closed to new replies.