Discussion Locked

RAS & DHCP & Internet

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do I set up DHCP and Ras to allow internal computers to access the internet.

I have setup RAs to allow out and incoming calls. My ISP has assigned dedicated IP.

DHCP Global Scope
Router: 192.168.31.1
DNS: IP's by ISP
Wins: 192.168.31.2"server"
Node type: 0x08

I have tried assigning router Ip to Server NIC. Did not work.
In WINS I can't figure out how to setup server for multihomed. It automatically built a unique entry for the dserver and I am unable to edit it.

All internal computers run NetBEUI and TCP/IP
I need some serious help. My client is getting upset.
Please email me if you have an understanding of DHCP RAS Wins.
gfreeman@infonetz.com

Gregg Freeman

9 replies

by doubledown

I think you may want to concentrate your efforts on Network Address Translation. If you have one static IP assigned by your ISP then you need to configure your router to translate between internal addresses and the static IP. Also, you probably know NetBEUI is not routable, so traffic using that protocol won't pass through your router. Don't know the specifics as it relates to NATs though.

Hope this helps a little.

by robbinsr

Has your question been answered? If so please close your forum, if your question is still open please repost it with more current information. Thank you.

This discussion is closed to new replies.