Discussion Locked

RAS server won't answer

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running NT 4.0 w/SP6 on my PDC and I have a client running Win98. I have installed an internal modem into my PDC and configured RAS onto it (it is set up correctly as far as I can tell because in Remote Access Admin the port my modem is connected to is "Waiting for call"). I have also configured DUN on the Win98 client to dial in but when it tries to connect, the server never answers (if I plug a phone into the same wall outlet that the server is on, the phone rings when I dial from the client). Am I missing something here?

1 reply

by craig_vm

After you installed RAS did you reapply the service pack? And check your RAS settings. Make sure "allow incoming only" or "allow incoming and outgoing" is checked. I think by default it is set to allow outgoing only.

This discussion is closed to new replies.