Discussion Locked

Re: 771AS Motherboard AMD K7 Athlon Pro

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just installed a 771AS Motherboard with AMD K7 Athlon Processor, VIA KX133 Drivers. On to a system with Windows 95, HD, CD Rom. All is installed at this point. I am trying to install A "CD Writer" CRW 6206A by Acer. (I need procedures on how to get this CDW installed correctly.) Everytime I get the drivers load it wants the standard drivers. It makes my system want to boot from the CD Rom and does not recognize the motherboard or Floppy. Has anyone had this problem and can you give me information step by step on how to get it to work with everything else. I need infor as soon as possible. I have also tried to contact the support for the CD Writer without help.

7 replies

by mckaytech

I think I would try first getting the CD-RW to work as a standard CD and then worry about the writing function. There are a couple of things to look at:
check for a conflict between the CD and the hard drive (usually you'll want the HDD as Master on the Primary channel and the CD as Master on the Secondary channel).
make sure there is no CD in the drive and re-boot and see if it boots normally and recognizes the CD
download fresh drivers to a temp directory
install the drivers and when it asks for the location of the drivers, point it to the temp directory.

Hope this gets you started....

paul

by ffbb

Helped by manufacturer and hours troubleshooting over telephone. Thanks though for input.

by morriss1

Check your bios setup to see what the search for boot up is. Some setups looks for the Floppy, then the cd then the hard drive.
Check the old CD driver letter assingment, it may be set to force certaian letter assignments. Invest in a 98 SE upgrade. This Operating system has many of the new drivers and many new plug and play devices already. I just installed A DVD and a CDR and the drivers loaded automatically. Acer does not have a support system. You should try the authorized dealers who have support personnel such as Senneca Systems. They are a wholesaler for Acer and may be able to help you.

by ffbb

Helped by manufacturer and hours of troubleshooting over the telephone. Thanks though for your input.

by khinton

Two possibilities:
1. Download the latest patch from the MS site (microsoft.com/update) for the AMD chip as it somtime has a problem win98 and CDROM.
2. Enter the BIOS and change the boot order making sure the cdrom is not a bootable option.

by ffbb

Helped by manufacturer and hours of troubleshooting over the telephone. Thanks though for your input.

This discussion is closed to new replies.