Discussion Locked

rebuild tcp/ip or client for ms networks

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
win 2000 is broken and I need to fix the tcp/ip and or the bindings... Specificially I need to reinstall all necessary protocals to access the internet. I have attemepted to RIP all adapters and protocals and reinstall from both Admin and Safe Mode Admin with no avail. I would love to hear from someone that can give me an option other than reinstalling the OS...

5 replies

by p.j.hutchison

What was wrong with it in the first place?
Why can't you reinstall drivers + protocols? What errors are you getting?

by judicatorexodus

If I am not mistaken, windows 2000 must have some type of protocol installed at all times. What you may want to do is add either NetBeui or IPX/SPX, then try removing and then re-installing TCP/IP. Once that is done, then you may remove the the other protocols you installed that you don't need. As for client for MS networks, it should let you remove it, as I have no idea what that could be if not.

Hope that points you in the right direction.

by sgt_shultz

sounds like you got tcpip etc back installed ok. what do you get when you do this test:
Start/run/command at prompt type
ipconfig post what you get
while there try ipconfig /release then
ipconfig /renew see if anything changed. while in command prompt ping dns servers. get the numbers from your isp. type exit to close command window. can you get at internet with ip address instead of name? ping (also done at command prompt) an ip address to get it's number address. if you like answers like this, you need to post a lot more about what your errors are and what steps you are performing to get them else even with lots of points it is not worth the time for guessing wrong, see?

This discussion is closed to new replies.