Discussion Locked

Recovering files after reformat...

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

All:

Just finished fixing a customers Dell computer on Friday. He had some files that he had wanted backed up but did not mention that he wanted 10 Gig saved.

I installed a new drive then went to work redoing the O/S. He had multiple viruses and the wrong virus scanner on his system and it was not updated. Needless to say I ended up deleting the partitions on the drives to recover as much room as possible and then NTFS regular format of both drives. After this was done I installed XP pro and the proper virus scanner for the version of Windows.

I find out later that the customer had a number of files he did not mark for backup but wants restored (all picture files). Any idea's how to go about it?

Doug

4 replies

by ccollins

I suggest doing a dance and throwing some bones on the floor, as that'll be as much as you can do if you deleted the partitions and then reformatted. You are talking a very expensive and unlikely rescue. It cost us ?600 a drive to get stuff back from a Fujitsu chip failure. It's more expensive if you've erased it.

by bfilmfan

I hope that you have some statement in your service agreements that releases you from damages in the event this occurs.

by gralfus

I use a forensics toolset that boots up on a CD and allows me to image a drive and do a search for file headers and footers (Penguin Sleuth Kit). However, it takes quite a bit of practice to get it working right. (Uses Linux "dd" and "foremost" programs)

Formatting a drive doesn't delete the information, but the stuff you installed overwrote whatever was there. It all depends on where the files were located on the drive and if they were fragmented or not. You could try something like this. However, it doesn't look promising and the customer bears most of the blame for not telling you ahead of time.

by anonynona

What was mentioned in the previous note was true to some extent; when data is added to the drive, old data is overwritten. But, to overwrite it all old data would only occur if several factors were all in place at the same time and you were putting more data on the drive than it originally held... Unfortunately, though, you didn't just erase files, but reformatted the old drive and, from the sounds of it, the old drive was not NTFS to begin with, nor was the opsys WinXP Pro...recovery, even by the data recovery outfits, will be virtually (at best) nil. (The decision as to what "the proper virus scanner for the version of Windows" is a curiousity, but answering it would just spark useless arguing amongst neophytes and hobbyists, who appear to make up the larger sector of "members." )

Chalk this one up to experience, Doug, as well as how you are going to have to handle your customer's dissatisfaction. The blame rests entirely on your customer, not the slightest bit on you. Hindsight is always 20-20 and a 100% data restoration into a seperate partition should really be done to prevent any such future problems. And, yes, you need to have a standard disclaimer in writing that is given to a customer prior to beginning work, that you cannot be held responsible for any loss of data, but that you do your utmost to prevent any such possible loss. You may feel inclined (as I'm certain your customer may loudly expect) to offer some amount of reimbursement, but it's up to you...based upon what you've said (of course that's not real detailed! LOL), if I were you I wouldn't. Good luck in how things go...life will continue on.

This discussion is closed to new replies.