Discussion Locked

Redundant Routes Incoming BGP

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Company X has T-1 and Cable modem. Setup includes servers A and B. Each server is on the same IP subnet. Company's M,N,O,P,Q,R,etc need to access servers A and B over the T-1. If the T-1 goes down, these companies need to be rerouted to the cable line and connected to the servers A or B. AT&T is the T-1 provider, and will not put BGP entries in their border routers for the cable company. Any ideas on how to accomplish this! Please let me know ASAP. Thanks, JP

3 replies

by mckaytech

I'm not surprised at AT&T's position on this but it does create a challenge.

A couple possible solutions come to mind. If you can swing redundant routers at each access point, an implementation of HSRP that tracks the T-1 interface on the activerouter could work.

Another possibility would be DDR where the alternate route would be to the cable modem.

But it's not clear to me how Companies M, N,... are connected to your T-1. Is it a frame-relay circuit where they each have a DLCI or does your T-1 go to the Internet and they come to you across the Internet using VPN?

paul

This discussion is closed to new replies.