16 replies
by mark2.0 Accepted solution
by older mycroft Accepted solution
by mark2.0 Accepted solution
by older mycroft Accepted solution
by larryd4 Accepted solution
by mark2.0 Accepted solution
by kenone Accepted solution
by mark2.0 Accepted solution
by who am i really Accepted solution
I've found the majority of the time the COA key on the side of the machine will be accepted by a bare unbranded OEM OS install CD,
you know the ones that say:
"For Distribution Only with a new PC"
I've resorted to restoring machines that way, using an OEM CD and the branded COA Key from the original install,
the COA key on the side has to match the OS and be the same version;
OEM XP-Pro will not work with that HP or Dell XP-Home COA stuck to the side of the machine, and generally it needs to be the same service pack or lower on the branded COA key to work with the bare OEM CD.
by mark2.0 Accepted solution
by who am i really Accepted solution
I'm talking about the Bare OEM CDs that the local system builder shop uses, and Tiger Direct or Newegg etc. sell with their DIY systems;
the Dell branded CD has a small piece of code that checks to see if the system is a Dell and then either installs, hangs, or spouts back saying:
"This is a Dell CD and can only be used with a Dell System"
if you have a DIY system builder Bare OEM CD windows should install, and without all the Dell Bloatware.
by oh smeg Accepted solution
But I'm not really sure that they will work a=with this machine.
Sure you had XP Originally Installed but the system originally came with Vista Loaded not XP.
The problem with Dell Recovery Disc's is that they are not a full version of XP they are a Part Version made for a specific Dell Hardware configuration and if your hardware isn't that configuration they do not work.
You need a M$ Branded Install Disc here and you may need to slipstream the SATA Drivers to it by using a product like nLite.
http://www.nliteos.com/download.html
just be sure to read the directions for use listed under guides here
If you have to go to the trouble of making a Install Disc for this system I would add the Sound, Video, LAN Drivers as well as any Service Packs that where released after the XP Install Disc was made.
With a Slipstreamed Install Disc made by nLite it will perform exactly the same as the Dell Recovery Disc and you can not do a In Place Install With it or use the Repair Option that is the more useful as that is removed from the Files when you add things to the Complete Disc. You can however use the M$ Branded Install Disc to do a Repair Install provided that you do not delete the existing partition as the SATA Drivers will already be present. ;)
Col
by rob miners Accepted solution
by mark2.0 Accepted solution
by oh smeg Accepted solution
What exactly are you using here?
I would try making your own Slipstreamed Image for this system with a M$ OEM Install Disc as apposed to a Dell Recovery Disc and nLite.
http://www.nliteos.com/download.html
Just be sure to read the directions listed under Guides on their Web Site here
It very much sounds as if there is something missing in the way or a necessary Driver here.
But personally as you have other computers of this model I would try a Base Image from a Install and use that instead of constantly reloading systems every time that you need to change users. It's just much faster and hence considerably cheaper for the business. Just keep a single Base Image of the HDD and use a Cloning Utility like Acronis True Image to clone from to the computers. Should take about 10 minutes tops and then all you need do is apply any Hot Fixes/Patches that have been released since the Image was made.
Col
by mark2.0 Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending