Question Locked

Remote desktop connections

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a desktop running Windows Server 2003 Small Business, adn 2 other workstations remoting into that one and running POS software. Sometimes the workstations stop working for a few seconds and then they disconnect from the server and come right back. This makes for what seems an unstable connection issue. I have done extensive troubleshooting checking the services, network connections, etc.

Help???

I feel like I am at the end of my wit!

Julio

9 replies

by johnson.charles.c

Okay so you say that they (the workstations) stop working? Does this mean that nothing on them works?
Are you using RDP, or windows remote desktop?
Are the workstations "remoting in" with different ID's or the same?
Jusat need some background info to help.
-AJ

by jmaldonado5

Both workstations are using remote desktop connection into the server. They are running the POS software from the server, (two separate links from the same server. When it stops, it usually is for a few second and then they either reconnect rightaway or you have to reconnect manually. The workstations are on a different location from the server.

Let me know if there is any other information you would need.

Thank you for the quick reply.

Julio

by johnson.charles.c

You say they are at a different location than the server?
How are they connected location-wise? HTTP? VPN?

by johnson.charles.c

I asked how they were connecting to eliminate some concerns of bandwidth.
This could be the root of your problem. If the App server's IP address is pingable, then PING it continuously from both POS terminals and watch the "time=" section. If is basically steady, your good, if not then you have problems...

by jmaldonado5

That makes sense, I will do that when I make it there and report back to you...

Thank you,

Julio.

P.S. I will pay you if you are able to help me solve this issue.

by jmaldonado5

I got steady pinging on all of them, back and forth. I checked the services running and it looks normal, as well as the group policies. I don't really know what else to check for at this point.

Thank you,

Julio

by johnson.charles.c

We are going top assume that the connection isnt the issue, and that the bandwidth between sites is good.
On the settings side for the POS terminals, edit the settings to their lowest standard.
Under display tab, change to the lowest setting desired. Try 256 colors first. Under local resources, NO sounds, NO drives, NO Printers, NO serial ports (unless any of the proceeding were necessary). Under the Experience tab only select bitmap caching.
Here is a website for when you start seeing error msg's :
http://technet2.microsoft.com/WindowsServer/en/library/83ddcc90-4409-4063-8bac-f5fcb4d1c55b1033.mspx?mfr=true

One other thing, the remote desktop is an insecure protocol - it transmits usernames/passwords and data in the clear. Make sure you are using a ssh tunnel or something else similarly secure.

Let me know if this helps.
-AJ

This discussion is closed to new replies.