Discussion Locked

Remote Desktop Tunneling over VPN

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am working in a Windows 2003 Server R2 / Windows XP client environment

I've recently established a VPN connection with the server which works just fine as far as the file sharing is concerned.

FYI: my port 1723 is mapped on the router for VPN so that it forwards all the VPN requests to the server

Also, I have my remote desktop configured as well which is working fine.

FYI: I've mapped port 3389 on the router to forward all RDP requests to the server

I am using a Linksys WRT54G router.

Here's my concern:

What I am wililng to do is use Remote desktop only through VPN. ie, here's what I am expecting to see:

First I should dial my VPN connection and once it is established, I should be successfully abe to establish the remote desktop connection with the server.

In my case, I am able to establish the remote desktop connection with and without establishing the VPN connection.

In short, If I try to open up the remote desktop connection using the ISP assigned public IP address without establishing the VPN connection, the server or router is letting me do that. Whereas I dont want that to happen. I am expecting to see that: I should get the access to remote desktop connection only when my VPN connection is established and not otherwise.

I think that I've skipped or missed an important step due which this is not happening.

I would highly appreciate your help if you could guide me through the correct procedure to achieve this.

Thanks

1 reply

by captbilly1eye

Thank you for your post. Unfortunately, it is not likely to get the attention it deserves in the Discussion forum. Please re-post to the Questions forum by selecting the "Ask a Question" button. You may copy and paste your content to there.

Many do not read the Discussions forum and taking this step helps to insure that your Question gets the attention it deserves.
Unfortunately, there is currently no way to delete the original post in the Discussions forum. That is understood by all. However, if you want, you can put a link in it to the new posting in the Questions Forum.

Please do not forget to rate answers that you find helpful as being so.

Good Luck!

This discussion is closed to new replies.