Discussion Locked

Removable Storage Service

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running Windows 2000 and my CDROM drives do not work. Here is a capture of the error from the event viewer: Event Type: Error
Event Source: Removable Storage Service
Event Category: None
Event ID: 17
Date: 8/28/2001
Time: 6:39:15 AM
User: N/A
Computer: CC583825-A
Description:
RSM cannot manage library CdRom0. It encountered an unspecified error. This can be caused by a number of problems including, but not limited to, database corruption, failure communicating with the library, or insufficient system resources.

I also get the same error for CdRom1, and I get them both at the same time. I have tried reinstalling device drivers and I have consulted the Microsoft Knowledge base and have been unsucessful. Please Help.

Thanks.
Brian

9 replies

by maxwell edison

After you install or upgrade your computer to Windows 2000, there is only a
single drive letter for your ATAPI CD-ROM changer. Windows 2000 uses Removable
Storage Manager (RSM) to mount, dismount, and manage all removable media. This
includes discs contained in ATAPI CD-ROM changers that hold several CD-ROMs.
This type of device receives only a single drive letter in Windows 2000.

The way Windows 2000 handles removable media is different from the way Microsoft
Windows NT 4.0 and earlier versions handle removable media. This type of device
in Windows NT 4.0 has a separate drive letter for each piece of media the device
is capable of managing and swaps media automatically as each drive letter is
used.he management of media was offloaded from the individual device or program to
RSM to facilitate sharing devices and media between programs and users. RSM can
handle large tape libraries or CD-ROM jukeboxes, and keeps track of device
status, media requests from programs, and media usage.

Unfortunately, these types of stand-alone CD-ROM changers do not lend themselves
well to being managed in this way and require manual mounting and dismounting of
discs into the single drive letter displayed in My Computer or WindowsExplorer
before you can use the disc.

If the CD-ROM changer hardware you have installed is fully supported by Windows
2000, each disc that is in the CD-ROM changer is mounted, read, and cataloged
under the Import media pool.

If the installed CD-ROM changer device is not on the Windows 2000 Hardware
Compatibility List (HCL) or is not detected as a changer device, you see only a
single disc under the Import media pool, even if you have multiple discs
physically loaded in the CD-ROM changer.

continued in comments.....

by maxwell edison

.
.
Using the Computer Management (Compmgmt.msc) console, under Storage - Removable
Storage, you should see the individual CD-ROM labels or titles for each disc
recognized by RSM under:

Media Pools
Import
CD-ROM (displays media label names and current library name)

Additionally, these same labels are displayed within that device's media library
along with the slot location so you can choose to mount or dismount the
appropriate disc. The drives also display whichdisc is currently loaded from
the media library. You can view this information under:

Physical Locations
[DEVICE_NAME] (physical device CD-ROM changer library)
Media (displays media label name, slot number, and drive number information)
Drives (displays drive[s], loaded media, and state)

From either of the above two locations, you can choose to mount or dismount any
given disc. This is accomplished by right-clicking the disc you want to use, and
then clicking Mount. Once mounted into the drive, RSM allows access to it by
using the assigned drive letter or mount point for that device.

You can use the RSM.EXE command to mount CD-ROM changer discs by creating a batch
file. You can modify the following sample batch file to fit your CD-ROM
changer's characteristics:

continued in next comments...

by maxwell edison

.
Mount.bat
---------

@echo OFF

rem - Extract the friendly name of your changer using: rsm view /tchanger
rem - then replace the string following the /cf with the string returned.

rem example:

rem rsm view /tchanger
rem CHANGER

rem NEC CD-ROM DRIVE:253

rem The command completed successfully.

if "%1"=="" GOTO USAGE
if "%1"=="/?" GOTO USAGE
if "%1"=="1" GOTO SLOT1
if "%1"=="2" GOTO SLOT2
if "%1"=="3" GOTO SLOT3
if "%1"=="4" GOTO SLOT4
if "%1"=="e" GOTO EJECT
GOTO USAGE

:SLOT1
rsm mount /sf"Slot 1" /cf"NEC CD-ROM DRIVE:253" /oread
if %ERRORLEVEL% equ 536870916 GOTO MOUNTED
@echo %ERRORLEVEL%
GOTO END

:SLOT2
rsm mount /sf"Slot 2" /cf"NEC CD-ROM DRIVE:253" /oread
if %ERRORLEVEL% equ 536870916 GOTO MOUNTED
@echo %ERRORLEVEL%
GOTO END

:SLOT3
rsm mount /sf"Slot 3" /cf"NEC CD-ROM DRIVE:253" /oread
if %ERRORLEVEL% equ 536870916 GOTO MOUNTED
@echo %ERRORLEVEL% GOTO END

:SLOT4
rsm.exe mount /sf"Slot 4" /cf"NEC CD-ROM DRIVE:253" /oread
if %ERRORLEVEL% equ 536870916 GOTO MOUNTED
@echo %ERRORLEVEL%
GOTO END

:MOUNTED
@echo .
@echo REASON: MEDIA ALREADY MOUNTED, OR NO MEDIA IN SLOT
GOTO END

:USAGE
@echo .
@echo To mount media, enter slot number between 1 and 4
@echo e.g. Mount 1
@echo .
@echo To eject current slot enter Mount E
GOTO END

:EJECT
net stop ntmssvc
start /wait rsm ejectatapi /n0
@echo %ERRORLEVEL%
net start ntmssvc

:END
rem @echo .
rem @echo DONE

by maxwell edison

For additional information about Removable Storage Manager, please click the
article number below to view the article in the Microsoft Knowledge Base:

Q231814 Removable Storage Manager May Not Eject Media for Some Devices.

>>The preceding information was obtained from MS KB Q227425<<

Hope this gets you going in the right direction.

Regards,

Max

by maxwell edison

.
.
P.S. A query of "RSM" in TechNet KB will result in quite a few documents on the subject. If the one posted above does not exactly identify your problem, perhaps another one will.

Good luck,

Max

by acirem77

Just letting all of you know that I have still not found a solution to this problem as of yet and any help would be greatly apreciated.

by acirem77

I think I should state clearly now that I am not using a CDROM changer device. I am running one cd/dvd-rom drive and one cd-rw drive. Both have drive letters in my computer, but the system acts as if there's no media inserted even if there is whenI try to access the drives.

Thanks again,
Brian

by acirem77

I've decided to close this question, what I did for a solution was reinstalled Windows 2000 and decided not to use Service Pack 2. If anyone still knows a way to resolve this without reinstallations, I would like to know for future reference. Thanks for all your help anyway.

This discussion is closed to new replies.